Pros: Easy to handle, carry, and pack; has dust port for shop vac; has storage solution in cord for adjustment wrench; acceptable cutting power for size, competes with cheaper 7 1/4in circular saws on price, comes with a rip fence; narrow width of sled makes it easier to cut with limited space, like on a narrow work piece that has it’s edge on one side clamped down. Cons: Lacks the power most reviews would have you expect so it cuts quite slowly, shuddered a few times and really slowed ripping some pine 2x4s; small width of the sled means it’s easier to inadvertently tilt it a bit and cut at a slight angle; rip fence has flimsy plastic section that flexes; screw mechanism for tightening rip fence causes it to move as you get it tight, which is annoying and leads to extra effort/attempts to get it both tight and perfectly accurate for your cut. Bottom line: This is great for the homeowner or crafter that occasionally needs a circular saw for a project or fix around the house, not making lots of long accurate cuts.
My kids also helped cut wood and the saw was as easy for them to use as for me, and I’m a petite woman. On the right side of the T fence, I put a little wingnut under the T fence since a gap existed between the T fence and the Kreg sled; using a wing nut, I have little “Handles” to push it in and out, and needn’t worry about it slipping out while using the saw. Cutting across a longer length means just continuing the saw straight or stopping then repositioning the track ahead. I did both.
worx circular saw Related Question:
Can a mini circular saw cut a 2×4?
The new WORXSAW new Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in. circular saw.
Is Worx owned by Black and Decker?
However, the tools themselves are still sold under the Black & Decker name, with the company we are talking about today being a wholly-owned subsidiary of Stanley Black & Decker. On a side note, it is interesting that this parent company also owns other brands including DeWalt and Craftsman.
Is Worx an American company?
WORX is a line of lawn and garden equipment and power tools owned and distributed by the Positec Tool Corporation, a manufacturing company based in Suzhou, China with North American headquarters in Charlotte, North Carolina.
Are cordless circular saws worth it?
It is really worth buying a cordless circular saw by spending 60$-150$. Because it can be used without a power cord and power supply, that will be easy to use outdoor and portable. Cordless saws are powered by Li-Ion batteries, and they can use about 30 mins continuously.
How long does a cordless circular saw last?
A portable circular saw (along with a cordless power drill) is one of the must-have tools for the DIYers home workshop. Buy a good circular saw now and you can expect to still be using it in 10 or 20 years.
What should I look for when buying a circular saw?
Features that help you work effectively with a circular saw include accurate cutline markers, good blade visibility, smooth guard retraction, and a flat shoe set parallel to the blade. The best cutline markers line up exactly with the kerf cut by the saw. You want a notch no wider than a thin-kerf saw blade.
Is a mini circular saw worth it?
Is a mini circular saw required for professional woodworking? The answer is simple: no. A normal circle saw has higher cutting depth, power, and can perform all of the tasks that a small circular saw can. But compact circular saws are a good compromise, providing power, convenience, and comfort.
What size circular saw Do I need to cut 2X4?
You need a minimum 5-3/8 inch size circular saw blade to cut a 2X4 at a 90 degree angle in one cut which is a crosscut. If you want to cut a 45 degree bevel with this size circular saw it will take 2 cuts. You could go with a 7-1/4inch or 10 inch blade to avoid making multiple cuts with the 45 degree bevel angle.
How close does a toe kick saw cut?
The saw will cut flush up the walls or baseboard on a 90 degree angle. Maximum clearance of this tool under toe kicks is 3 1/2 inches combined with a maximum cut depth of 3/4 inch.
How deep can a 4 1/2 inch circular saw cut?
The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees. The saw also features a depth of cut adjustment lever and a 1-1/4″ vacuum adapter.
Can I cut concrete with my circular saw?
Use a standard circular saw, equipped with a corundum or diamond blade, for small tasks. For slabs, it’s best to cut through the top inch, then use a sledgehammer to break off the rest. The jagged edge left below the cutting line provides a good rough edge for the new concrete to bond to.
Are Worx and DeWalt batteries compatible?
Officially, Dewalt and Worx are not compatible. But you can use adapters like this 4-Pin Li-Ion DW 20V converter. But this method requires a skilled hand. A layperson cannot use it to operate Dewalt tools with Worx batteries.
Who makes Black and Decker?
One, a whole bunch of the top power tool brands — including DeWalt, Black & Decker, Craftsman, Porter-Cable and more — are all owned by the same company, Stanley Black & Decker.
Who makes Ryobi?
Ryobi Power Tools and Ryobi Outdoor Power Equipment are brands of Techtronic Industries, used under license from Ryobi Limited. Techtronic Industries also owns Milwaukee Electric Tool, AEG (AEG Powertools, licensed from Electrolux), Homelite, Hoover US, Dirt Devil, and Vax.
Where are Bosch tools made?
Bosch is a German power tool manufacturer, and some of their tools and products are still manufactured in Germany, as well as in Switzerland. However, many of their components are now manufactured in Malaysia, Mexico, Taiwan, and China.
