Standard chainsaw bar lengths are between 8–24 inches (20–61 cm). The true length of the chainsaw bar will always be longer than the cutting length.
“Using the wrong size bar or chain can damage the chainsaw and injure the chainsaw operator,” says Vince Christofora of Woodstock Hardware. Read on to learn how to measure your chainsaw’s bar and chain. Sometimes called a chainsaw blade, the chainsaw bar is the metal “Arm” that holds and supports the chain during cutting.
“It’s important to note that not every bar or chain will work for every saw. For instance, larger chainsaw bars work well with more powerful motors because it takes more energy to drive the chain around the bar. This is also why most electric chainsaws are typically smaller at around 12-14”. Pictured below is my husqvarna with chainsaw bar and chain metrics detailed. In addition to determining the bar length of your chainsaw, you should be able to measure your chain’s pitch, gauge, and drive links.
How to choose the chainsaw barThe chainsaw blades are not all the same: if you need to replace the chainsaw bar, first follow the instructions in the chainsaw user’s manual and select the alternative from those approved by the manufacturer. Thanks to these pieces of information, you can easily know how to measure a chainsaw bar. How to measure a chainsaw barIf you are looking for a spare bar for your chainsaw, you need to determine its bar size.
what is chainsaw bar length Related Question:
How is chainsaw bar length measured?
To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
Does chainsaw bar length matter?
The standard blade sizes for medium- to heavy-duty chainsaws are 14 to 18 inches, with engine displacements of 40 to 50 cc. Heavy-duty saws with long blades are adequate for heavy yard work, though in many cases they tend to be overkill and can actually hinder you on a small job.
What is the best bar length for a chainsaw?
A 16 to 18-inch bar should be enough to get the job done. This longer bar length will also work for cutting down small trees or removing shrubs.
Can you change bar length on chainsaw?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
What size bar can I put on my Stihl chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
What size tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
What size chainsaw do I need for a 36 inch bar?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
What bar length do I need?
What Size To Get? Size does matter on barbells. Both the length and the diameter will vary to suit the desired whip, but most barbells should be between 28mm and 29mm in diameter – don’t go any lower. Olympic bars tend to be 28-28.5mm for adequate whip, while squat bars will be more like 29mm.
How often should you replace chainsaw bar?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
Why are chainsaw bars shorter?
A shorter chain doesn’t compound torque like a smaller gear does. The amount of force applied at any point on the chain is identical. However, the shorter bar limits how much contact the chain can make with the wood.
Can I put a 20 inch bar on my 18 inch chainsaw?
Changing the bar and chain on your 18-inch chain saw to a 20-inch size will enable easier cutting of larger trees and branches. Larger chain saws cut through thicker trees and limbs.
What Stihl chainsaw has a 36 inch bar?
Stihl MS 661 C-M chainsaw (91.1cc) 36 inch barThe MS661 chainsaw is the successor to the MS660 which is used in the legendary competition – Stihl TimberSports Series.
Will a Oregon bar fit a Stihl?
Chainsaw Bar & S55 Chain, Fits Various Stihl Models (105668) | Oregon Products.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between a R56 and a S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.